Hasil untuk "Acoustics. Sound"

April Shi Min Ching, Chris Davis, Mary Haouchab et al.

Previous research suggests that word- and pitch-based cues differ between turn-medial and turn-final utterances, and that listeners use these differences to anticipate turn completion. However, the relative roles of these cues in turn-holding vs turn-yielding judgments remain unclear. To address this, we tested 26 young native English listeners on turn-status judgments using turn-medial or turn-final phrases, with or without selectively removed pitch and lexical information. Results showed that for turn-medial stimuli, accuracy decreased from 88% (words and pitch) to 55% (neither). For turn-final stimuli, accuracy ranged from 76% (with words) to 53% (neither), showing different cue dependencies across turn positions.

Yuhui Liu, Yue Qi, Yangjian Cai et al.

Gas sensing detects gas properties, such as physical, molecular, optical, thermodynamic, and dynamic properties. Light-induced acoustic techniques include monitoring the optical and physical properties of the gas. Fiber-based gas sensing is important because it offers several unique advantages compared to traditional gas sensing technologies, such as high sensitivity and accuracy, a compact and lightweight design, remote sensing capabilities, multiplexing, and distributed sensing. We review the recent developments in optical fiber-based gas sensors utilizing light-induced acoustic/elastic techniques based on photoacoustic spectroscopy, Brillouin scattering, and light-induced thermoelastic spectroscopy (LITES).

Krzysztof KOSAŁA

The research described in the article addresses the problem of measurement, prediction and practical use of the acoustic properties of materials determined in an impedance tube. The aim of the research was to develop a simple calculation model for the insertion loss of small machinery enclosures, based on the normal incidence sound transmission loss and the normal incidence sound absorption coefficient of porous and fibrous materials. Both experimental and model tests were carried out on materials such as mineral wool, melamine foam and rebonded polyurethane foam. Assessing the absorption properties of the tested porous and fibrous materials was performed using selected theoretical models, relating the calculations of the normal incidence sound absorption coefficient to measurements of this parameter conducted using an impedance tube. The application of the modified Allard and Champoux model brought the best results with the smallest discrepancies of the obtained results in relation to the experimental tests. Assessing the sound-insulating properties of the tested mineral wool was carried out using the proposed calculation model for the normal incidence sound transmission loss, relating the obtained results to measurements conducted using an impedance tube. The assessment of the sound-insulating properties of porous and fibrous materials was performed using the proposed calculation model for insertion loss, which was validated using two prototype test stands for determining the insertion loss of cubic enclosures, in this case with walls made of porous and fibrous materials. Satisfactory results were obtained for engineering applications in the calculation results using the proposed models with respect to measurements. The results may have practical applications in assessing the effectiveness of acoustic enclosures, in which the basic construction material is an appropriate porous or fibrous plate, selected to have both sound-absorbing and sound-insulating properties.

Yujie QIAN, Zhengyuan GAO, Jie ZHANG

Due to space limitations during installation, reducing low-frequency noise has always been a challenging area. Sub-wavelength structures are typically favored in such scenarios for noise reduction. This paper explores the potential of micro-slit panels (MSP) for low-frequency sound absorption. To further optimize the panel thickness, coupled MSPs (CMSP) with a distance between two MSPs of less than 1 mm are proposed. Firstly, the low-frequency absorption performances of a single MSP based on two optimized schemes – the cavity-depth optimal scheme (COS) and the panel thickness optimal scheme (TOS) – are examined and compared with those of existing ultrathin metamaterials. The results demonstrate that MSP has significant potential for low frequency sound absorption, and COS allows for a smaller overall structural thickness but a larger panel thickness than TOS. Secondly, to reduce the panel thickness, the CMSP is developed and the theoretical model of its acoustic impedance is established and validated by experiments. Then, based on the theoretical model, the low-frequency absorption potential of CMSP is optimized using COS. The results show that both the overall thickness and the panel thickness of the CMSP absorber are reduced while maintaining better performance. Furthermore, the proposed absorber achieves a subwavelength scale since its total thickness can be as small as 0.138λ.

M. Franko, M.L. Baesso, G. Paltauf et al.

S. Handel

Zoran ŠARIĆ, Miško SUBOTIĆ, Ružica BILIBAJKIĆ et al.

Microphone array with minimum variance (MVDR) beamformer is a commonly used method for ambient noise suppression. Unfortunately, the performance of the MVDR beamformer is poor in a real reverberant room due to multipath wave propagation. To overcome this problem, we propose three improvements. Firstly, we propose end-fire microphone array that has been shown to have a better directivity index than the corresponding broadside microphone array. Secondly, we propose the use of unidirectional microphones instead of omnidirectional ones. Thirdly, we propose an adaptation of its adaptive algorithm during the pause of speech, which improves its robustness against the room reverberation and deviation from the optimal receiving direction. The performance of the proposed microphone array was theoretically analyzed using a diffuse noise model. Simulation analysis was performed for combined diffuse and coherent noise using the image model of the reverberant room. Real room tests were conducted using a four-microphone array placed in a small office room. The theoretical analysis and the real room tests showed that the proposed solution considerably improves speech quality.

Qiaozhi Zhang, Huatao Li, Congnan Cen et al.

There is a need to understand the ultrasound-induced changes in the interactions between proteins and phenolic compounds at different pH. This study systematically explored the role of high-intensity ultrasound pre-treatment on the binding mechanisms of β-lactoglobulin (β-LG) to two common phenolic compounds, i.e., (−)-epigallocatechin-3-gallate (EGCG) and chlorogenic acid (CA) at neutral and acidic pH (pH 7.2 and 2.4). Tryptophan fluorescence revealed that compared to proteins sonicated at 20% and 50% amplitudes, 35%-amplitude ultrasound pre-treatment (ULG-35) strengthened the binding affinities of EGCG/CA to β-LG without altering the main interaction force. After phenolic addition, ULG-35 displayed a similar but a greater extent of protein secondary and tertiary structural changes than the native protein, ascribed to the ultrasound-driven hydrophobic stacking among interacted molecules. The dominant form of β-LG (dimer/monomer) played a crucial role in the conformational and interfacial properties of complexes, which can be explained by the distinct binding sites at different pH as unveiled by molecular docking. Combining pre-ultrasound with EGCG interaction notably increased the foaming and emulsifying properties of β-LG, providing a feasible way for the modification of bovine whey proteins. These results shed light on the understanding of protein–phenolic non-covalent binding under ultrasound and help to develop complex systems with desired functionality and delivery.

Kaouther Kerboua, Oualid Hamdaoui, Abdulaziz Alghyamah

The present paper reports a numerical investigation of the feasibility of a hybrid concept associating the 1-Butyl-3-methylimidazolium Acetate [C4mim][CH3COO] to sonication, in terms of cavitation formation and generated extreme conditions allowing cellulose decomposition in the second reactivity site. The results of the proposed model revealed an acoustic power threshold of 1.8 atm, in order to expect a transient cavitation in the ionic liquid, leading to harsh conditions of 1559.8 K and 49 bar within the bulk volume of the acoustic cavitation bubble. The spatial and temporal variation of the temperature was simulated within the bulk volume of the bubble as well as in the thermal boundary layer jointly with the chemical kinetics. The first stage of the polymerization reduction was clearly attained and demonstrated through the decomposition rate of cellulose and the molar rate of emergence of anhydrocellulose, reaching the respective orders of magnitude of 1.71 × 104 mol/m3⋅s and 7.91 × 104 mol/m3⋅s.

Fallahi Mina, Hansen Martin, Doclo Simon et al.

In order to realize binaural auralizations with head tracking, BRIRs of individual listeners are needed for different head orientations. In this contribution, a filter-and-sum beamformer, referred to as virtual artificial head (VAH), was used to synthesize the BRIRs. To this end, room impulse responses were first measured with a VAH, using a planar microphone array with 24 microphones, for one fixed orientation, in an anechoic and a reverberant room. Then, individual spectral weights for 185 orientations of the listener’s head were calculated with different parameter sets. Parameters included the number and the direction of the sources considered in the calculation of spectral weights as well as the required minimum mean white noise gain (WNGm). For both acoustical environments, the quality of the resulting synthesized BRIRs was assessed perceptually in head-tracked auralizations, in direct comparison to real loudspeaker playback in the room. Results showed that both rooms could be auralized with the VAH for speech signals in a perceptually convincing manner, by employing spectral weights calculated with 72 source directions from the horizontal plane. In addition, low resulting WNGm values should be avoided. Furthermore, in the dynamic binaural auralization with speech signals in this study, individual BRIRs seemed to offer no advantage over non-individual BRIRs, confirming previous results that were obtained with simulated BRIRs.

Sasadhar Majhi

Total synthesis is frequently compared to climbing as it provides a suitable route to reach a high point from the floor, the complex natural product from simple and commercially available materials. The total synthesis has a privileged position of trust in confirming the hypothetical complex structures of natural products despite sophisticated analytical and spectroscopic instrumentation and techniques that are available presently. Moreover, total synthesis is also useful to prepare rare bioactive natural products in the laboratory as several bioactive secondary metabolites are obtained in small quantities from natural sources. The artistic aspect of the total synthesis of bioactive natural products continues to be praised today as it may provide environmental protection through the concept of green or clean chemistry. The use of ultrasound waves as a non-polluting source of energy is of great interest in the field of sustainable and pharmaceutical chemistry as it differs from conventional energy sources in terms of reaction rates, yields, selectivities, and purity of the products. The present review highlights the application of ultrasound as a green tool in the total synthesis of bioactive natural products as well as this article is also aimed to offer an overview of natural sources, structures, and biological activities of the promising natural products for the first time from 2005 to 2020 elegantly.

Luyao Wang, Liming Dai, Gang Hu

Conventional metallic sandwich panels are widely used for noise control owing to their good noise control capabilities and excellent mechanical strength-to-weight ratio property. Furthermore, sound-absorbing products consisting of glass or mineral fiber materials are generally filled into the sandwich structures to lower the vibration response in resonance frequency and to enhance the structural noise attenuation capacity. In the present study, a fiber-reinforced graphite material is used as an alternative to its metallic counterparts. Moreover, a wood-based renewable absorption material is used as the absorption material and is filled into the sandwich structural core. The vibro-acoustic characteristics of the panel with such a design are numerically investigated using Actran. The findings of the research indicate that the proposed sandwich structure achieves advanced low-frequency noise control performance in comparison with other conventional metallic sandwich panels. Approximately 7 dB increase in sound transmission loss in the audible-frequency range is achieved in addition to a reduced panel weight and more stable vibration with reduced amplitude. The existing data available in the literature are employed for validating and illustrating the accuracy and reliability of the proposed approach.

McLachlan Glen, Majdak Piotr, Reijniers Jonas et al.

Over the decades, Bayesian statistical inference has become a staple technique for modelling human multisensory perception. Many studies have successfully shown how sensory and prior information can be combined to optimally interpret our environment. Because of the multiple sound localisation cues available in the binaural signal, sound localisation models based on Bayesian inference are a promising way of explaining behavioural human data. An interesting aspect is the consideration of dynamic localisation cues obtained through self-motion. Here we provide a review of the recent developments in modelling dynamic sound localisation with a particular focus on Bayesian inference. Further, we describe a theoretical Bayesian framework capable to model dynamic and active listening situations in humans in a static auditory environment. In order to demonstrate its potential in future implementations, we provide results from two examples of simplified versions of that framework.

S. Serafin, M. Geronazzo, Cumhur Erkut et al.

Y. Jiang, Shai Maayani, T. Carmon et al.

We propose nonreciprocal phonon lasing in a coupled cavity system composed of an optomechanical and a spinning resonator. We show that the optical Sagnac effect leads to significant modifications in both the mechanical gain and the power threshold for phonon lasing. More importantly, the phonon lasing in this system is unidirectional, that is the phonon lasing takes place when the coupled system is driven in one direction but not the other. Our work establishes the potential of spinning optomechanical devices for low-power mechanical isolation and unidirectional amplification. This provides a new route, well within the reach of current experimental abilities, to operate cavity optomechanics devices for such a wide range of applications as directional phonon switches, invisible sound sensing, and topological or chiral acoustics.

Ramazan Aslan, Osman Turan

Marina V. Novoselova, Tatiana O. Abakumova, Boris N. Khlebtsov et al.

Photoacoustic (PA) imaging (PAI) is an emerging powerful tool for noninvasive real-time mapping of blood and lymphatic vessels and lymph nodes in vivo to diagnose cancer, lymphedema and other diseases. Among different PAI instruments, commercially available raster-scanning optoacoustic mesoscopy (RSOM) (iThera Medical GmbH., Germany) is useful for high-resolution imaging of different tissues with high potential of clinical translation. However, skin light scattering prevents mapping vessels and nodes deeper than 1–2 mm, that limits diagnostic values of PAI including RSOM. Here we demonstrate that glycerol-based tissue optical clearing (TOC) overcomes this challenge by reducing light scattering that improves RSOM depth penetration. In preclinical model of mouse limb in vivo, the replacement of conventional acoustic coupling agents such as water on the mixture of 70 % glycerol and 30 % ultrasound (US) gel resulted in the increase of tissue imaging depth in 1.5–2 times with 3D visualization of vessels with diameter down to 20 μm. To distinguish blood and lymphatic networks, we integrated label-free PA angiography (i.e., imaging of blood vessels), which uses hemoglobin as endogenous contrast agent, with PA lymphography based on labeling of lymphatic vessels with exogenous PA contrast agents. Similar to well-established clinical lymphography, contrast agents were injected in tissue and taken up by lymphatic vessels within a few minutes that provided quick RSOM lymphography. Furthermore, co-injection of PA contrast dye and multilayer nanocomposites as potential low-toxic drug-cargo showed selective prolonged accumulation of nanocomposites in sentinel lymph nodes. Overall, our findings open perspectives for deep and high resolution 3D PA angio- and lymphography, and for PA-guided lymphatic drug delivery using new RSOM & TOC approach.

Artur Zbiciak, Kazimierz Józefiak, Radosław Czubacki et al.

Noise is one of the major environmental concerns nowadays. The problem is especially significant around large urban agglomerations where high levels of noise can have a negative impact on physical or psychological well-being of citizens while a long-term exposure can be harmful to health. Residential areas are protected by the introduction of maximum allowable sound pressure levels according to appropriate norms. There are also similar regulations concerning natural areas under environmental protection. Different measures used in order to reduce levels of noise should be applied primarily to the source of the sound. This is the task mainly for the manufacturers of all kinds of machines as well as means of transport. However, noise levels can be also controlled by the introduction of appropriately designed or chosen elements or materials in civil engineering structures. The noise levels emitted by the rail traffic depend on the number, kind and speed of trains, night and day traffic organization as well as on the type of the railroad structure and its location (e.g. on an embankment, on a bridge or flyover). Railway noise mainly develops between wheels and rails and depends on the roughness of both these elements, rolling speed and dynamic characteristics of the railroad. The paper presents the mathematical formulation of a coupled acoustic-structure problem. Solving the problem with finite element method gives the possibility to predict sound pressure levels in the vicinity of a railway structure. A numerical model of a certain type of a railroad structure was built in order to simulate the acoustic wave propagation caused by a wheel-rail interaction. The harmonic analysis was carried out using the Abaqus software. The acoustic pressureobtained based on the harmonic analysis was evaluated in certain points of the acoustic medium for various excitation frequencies. The final results were presented in the form of one-third octave bands. In the article, a possible methodology for estimating noise levels from railway structures based on a numerical analysis was shown. In the future works, the numerical model will be validated by field test data and applied to evaluate different types of technological solutions (silencers) used to reduce railway noise levels. This paper is part of the project “Innovative solutions for the protection of people and building against noise from rail traffic”. The project is co-financed by the European Union from the European Regional Development Fund within the framework of the Smart Growth Operational Programme and by PKP PLK S.A. within the framework of a joint venture BRIK. Keywords: Finite Element Method; Acoustics; Railway Noise

F. Bertucci, É. Parmentier, G. Lecellier et al.

Different marine habitats are characterised by different soundscapes. How or which differences may be representative of the habitat characteristics and/or community structure remains however to be explored. A growing project in passive acoustics is to find a way to use soundscapes to have information on the habitat and on its changes. In this study we have successfully tested the potential of two acoustic indices, i.e. the average sound pressure level and the acoustic complexity index based on the frequency spectrum. Inside and outside marine protected areas of Moorea Island (French Polynesia), sound pressure level was positively correlated with the characteristics of the substratum and acoustic complexity was positively correlated with fish diversity. It clearly shows soundscape can be used to evaluate the acoustic features of marine protected areas, which presented a significantly higher ambient sound pressure level and were more acoustically complex than non-protected areas. This study further emphasizes the importance of acoustics as a tool in the monitoring of marine environments and in the elaboration and management of future conservation plans.

Anna Orlova, Marina Sirotkina, Ekaterina Smolina et al.

Raster-scan optoacoustic angiography at 532 nm wavelength with 50 μm lateral resolution at 2 mm diagnostic depth was used for quantitative characterization of neoangiogenesis in colon cancer models. Two tumor models of human colon adenocarcinoma (HT-29) and murine colon carcinoma (CT26) different in their histology and vascularization were compared. Tumors of both origins showed an inhomogeneous distribution of areas with high and low vascularization. Rapidly growing CT26 tumor demonstrated a higher rate of vessel growth from the periphery to the center. Peculiarities of the vascularity of tumor models revealed by optoacoustic imaging were confirmed by fluorescent microscopy with FITC-dextran and morphological analysis. The obtained results may be important for the investigation of tumor development and for improvement of colon cancer treatment strategies. Keywords: Optoacoustic imaging, Colon cancer models, Tumor vessel development