Hasil untuk "Analytical chemistry"

M. Richardson, J. Bowron

H. Seiler, H. Sigel, A. Sigel et al.

Shibani Chakravorty, Heli Trivedi, Richa Ranjan Sahai et al.

The proper treatment of diseases has greatly benefited from dental technological advancements. The dentist may view, precisely measure, and create models of both hard and soft tissue using 3D printing. The most cutting-edge technique in dentistry is 3D printing; but it also lacks the user-training trainee. In this paper, we will demonstrate how it is employed in various dental procedures.

Keval Bhavsar, Ramita Sood, Tarang Mehta et al.

Introduction: Mandibular angle fractures (MAFs) are divisive and have led to debate in terms of treatment. The study evaluated the new angled miniplate (banana plate) with the conventional miniplate for management of MAFs. Patients and Methods: The study included 53 patients of MAFs, 26 treated with the conventional miniplate (control group) and 27 with the angled miniplate (study group). The patients were followed up and evaluated for 6 months for mouth opening, bite force, and complications. Results: A longer operating time was noted in the study group. The mouth opening and bite force were higher in the study group with fewer postoperative complications. Conclusion: The new angled miniplate mimics the angle of the mandible and offers better tridimensional stability, fewer complications, and improved stability.

Ren Li, Zhiguo Zhang, Lichao Jiao et al.

Abstract Interpreting the degradation characteristics of waterlogged archaeological wood (WAW) is crucial for the conservation of wooden cultural heritage. Generally, multidisciplinary diagnostic methods, including physical, micromorphological, and chemical approaches, are employed to evaluate the preservation state of WAW. However, primarily focused on the sample level, this methodology limits the understanding of the variability in degradation from a detailed perspective. In this paper, we adopted the in-situ microscale attenuated total reflectance Fourier transform infrared (ATR-FTIR) method to investigate the degradation variability in waterlogged archaeological Masson pine (Pinus massoniana) wood excavated from the ancient Chinese shipwreck Nanhai No. 1. Specifically, spectra of earlywood (EW), latewood (LW), and compression wood (CW) were extracted and combined with chemometrics to achieve rapid classification of their degradation levels. The micromorphological features of wood cell walls in conjunction with the ratios of lignin (A1509) and carbohydrate (A1370) peak areas were used to estimate the degradation levels. Unlike recent wood, moderate degradation in CW and severe degradation in EW and LW were classified in archaeological samples. The degradation levels were effectively determined through principal component analysis (PCA) and sparse partial least squares discriminant analysis (sPLSDA). The results suggest that chemometric analysis is a promising method to discern the variable degradation levels of archaeological wood at the tissue level. The methodologies developed in this study provide detailed insights into the degradation characteristics in WAW and improve the accuracy of evaluating the preservation state.

S. Kirkpatrick, J. Sanyova, K. Janssens et al.

Abstract The recent multi-analytical study carried out on the Van Eyck’s Ghent Altarpiece showed the simultaneous presence of several kinds of metal carboxylates in oil-rich glaze layers. This outcome raised the question whether these carboxylates had already formed during the preparation of the oil binder by the artists. In the case of early-stage formation, they may have had an impact on the drying rate of the resulting oil, as well as on its handling properties. This hypothesis was investigated using a model system of in-house-prepared linseed oil containing incremental concentrations (2–5–10 wt.%) of relevant metal carboxylates (i.e. Ca-, Zn-, Cu-, and Pb oleates and stearates). This paper describes the influence of these type of molecules on the drying rate of linseed oil and, to an extent, on its viscosity. The drying time of the linseed oil, to which one or more metal carboxylates were added, was measured with a drying recorder while the viscosity was assessed with a rheometer. When introduced together, some of these metal carboxylates act in synergy to shorten the drying time with respect to the situation when the same metal carboxylates were added separately to linseed oil. Mixtures of Ca- and Zn-oleates proved to have a larger effect than other binary combinations. Addition of two metal oleates (combination of Ca/Zn/Cu/Pb) reduced the drying time even more. On the other hand, specific combinations of three metal stearates and/or oleates also demonstrated a significant synergistic effect towards increasing the viscosity of the binder. Especially combinations of Ca/Zn/Cu and Ca/Zn/Pb stearates and oleates gave rise to the highest level of linseed oil viscosity increase, when compared to the situation in which the same metal carboxylates were added separately.

Lingqi Zhao, Tianwei Lai, Yingke Gao et al.

Induced-charge electro-osmosis (ICEO) is a research hotspot in bioengineering and analytical chemistry. Inflow-outflow asymmetry of ICEO was reported in the existing literatures, but systematic study on this phenomenon is insufficient. In this experimental study, we found that in strong electric fields, not only the velocity magnitude but also the vortex positions of ICEO are asymmetrical along the inflow and outflow directions because of the pronounced non-uniform surface electrokinetic transport. On the inflow and outflow directions, the amplitudes of velocities are unequal, ICEO maximum velocity positions change depending on the electric field intensity and sodium chloride (NaCl) concentration. Additionally, the distances between vortex centers are different. At NaCl solution concentration of 0.001 mol·L–1, the outflow velocity almost vanishes. The asymmetry rises with the increasing electric field intensity. The new discoveries can direct the application of microscale devices.

Bronwyn Ormsby, Angelica Bartoletti, Klaas Jan van den Berg et al.

Jiaxian Li, Zongren Yu, Biwen Shui et al.

Abstract In this paper, the organic pigments indigo and isatin were detected by high performance liquid chromatography (HPLC) in The Mural of Four Buddhas which is in Cave 3 from the ancient Chinese Tiantishan grottoes (Ming Dynasty, East Slope). By analysing the preservation conditions of the mural and the environmental conditions of the place where the Tiantishan grottoes are located, we speculated that the isatin detected in this mural was mainly produced by the oxidative decomposition of indigo by ozone (O3), rather than by photodegradation of indigo. We have used theoretical calculation software Gaussian09 (G09) and Amsterdam Density Functional (ADF) module in the Amsterdam Modeling Suite (AMS) software to simulate the reaction mechanism of O3 oxidation of indigo, and the end products of the oxidation of the natural plant dye indigo by O3 were identified as isatin, C16H10N2O3 and C8H6NO3 using HPLC, fluorescence spectroscopy and high performance liquid chromatography-mass spectrometry(HPLC–MS). This finding confirmed the accuracy of the mechanism of indigo fading by O3 oxidation. These findings provided a theoretical basis for subsequent research into the derivation of natural organic dyes in the face of increasing O3 pollution and for better protection of valuable historical and cultural heritage such as ancient Chinese grottoes murals.

Irina M. Ciortan, Tina G. Poulsson, Sony George et al.

Abstract In a previous article, we modelled the spectral and temporal dimensions of the photodegradation behaviour of pigments in the painting “A Japanese Lantern” by Oda Krohg. In particular, we extracted the endmembers and spectral fading rate of pigments by applying tensor decomposition on a time-series of spectroscopic point measurements. Now, we capture the same painting with a hyperspectral imaging setup and propose an approach to render the fading effects as 2D images. More precisely, from the hyperspectral image, we compute the concentration maps of each previously identified endmember with a least-squares unmixing method. Subsequently, by using tensor algebra, we multiply the concentration maps with the endmembers and their corresponding fading rate and obtain a 4D tensor where each pixel in the image is described by a spectrum and a fading function. This way, we generate past and future spatio-temporal simulations of the painting’s appearance by reversing and elevating light exposure, respectively.

S. Tajik, H. Beitollahi, S. Mohammadi et al.

The detection of hydrazine (HZ) is an important application in analytical chemistry. There have been recent advancements in using electrochemical detection for HZ. Electrochemical detection for HZ offers many advantages, e.g., high sensitivity, selectivity, speed, low investment and running cost, and low laboriousness. In addition, these methods are robust, reproducible, user-friendly, and compatible with the concept of green analytical chemistry. This review is devoted to the critical comparison of electrochemical sensors and measuring protocols used for the voltammetric and amperometric detection of the most frequently used HZ in water resources with desirable recovery. Attention is focused on the working electrode and its possible modification which is crucial for further development.

Anna Dzimitrowicz, Magda Caban, Dominik Terefinko et al.

Abstract Doxycycline (DOX), an antibiotic commonly used in medicine and veterinary, is frequently detected in natural waterways. Exposition of bacteria to DOX residuals poses a selective pressure leading to a common occurrence of DOX-resistance genetic determinants among microorganisms, including virulent human pathogens. In view of diminishment of the available therapeutic options, we developed a continuous-flow reaction-discharge system generating pulse-modulated radio-frequency atmospheric pressure glow discharge (pm-rf-APGD) intended for DOX removal from liquid solutions. A Design of Experiment and a Response Surface Methodology were implemented in the optimisation procedure. The removal efficiency of DOX equalling 79 ± 4.5% and the resultant degradation products were identified by High-Performance Liquid Chromatography–Diode Array Detection, Liquid Chromatography Quadruple Time of Flight Mass Spectrometry, Ultraperformance Liquid Chromatography–Tandem Mass Spectrometry, total organic carbon, total nitrogen, Attenuated Total Reflectance Furrier Transform–Infrared, and UV/Vis-based methods. The pm-rf-APGD-treated DOX solution due to the generated Reactive Oxygen and Nitrogen Species either lost its antimicrobial properties towards Escherichia coli ATCC25922 or significantly decreased biocidal activities by 37% and 29% in relation to Staphylococcus haemolyticus ATCC29970 and Staphylococcus aureus ATCC25904, respectively. Future implementation of this efficient and eco-friendly antibiotic-degradation technology into wastewater purification systems is predicted.

Magda Rybicka, Paulina Czaplewska, Jolanta Rzymowska et al.

Abstract The present research shows the antitumor activity of a protein-polysaccharide complex Venetin-1 obtained from the coelomic fluid of Dendrobaena veneta earthworms against A549 cancer cells. The investigations are a continuation of experiments on the antitumor activity of coelomic fluid obtained from this species. The Venetin-1 nanoparticle was obtained after thermal treatment of the coelomic fluid, separation from coelomocytes, filtration, and lyophilization. The preparation showed a selective effect on cancer cells, whereas normal cells were unaffected. Venetin-1 was effective against the lung cancer cells at doses of 31.3 and 62.5 µg/ml, and the results were imaged using light microscopy and scanning electron microscopy (SEM). The cells died mainly via the apoptosis pathway. Necrotic cells appeared sporadically in the microscopic view. SEM imaging revealed complete destruction of the A549 cells after the incubation with Venetin-1. The atomic force microscopy (AFM) analyses showed changes in the topography, peak force error images, and Young’s modulus (elasticity) of the A549 cells after the incubation with Venetin-1. The transmission electron cryomicroscopy (Cryo-TEM) analysis indicated a polymeric nature of the analyzed preparation. The samples of Venetin-1 showed a very homogeneous size profile with the microparticle size of approximately 58.23 nm. A significant decrease in Venetin-1 binding to sphingomyelin was observed. Venetin-1 lost its pore-forming activity or deactivation of the pore-forming activity occurred. This confirms the absence of hemolytic capacity of Venetin-1 towards red blood cells. The conducted analyses show the suitability of the obtained complex for biomedical research. The next step will consist in analyses of the effect of Venetin-1 on the immune system in mice.

Sheng Wang, Lizhen Liu, Can Wang et al.

The coronavirus disease 2019 (COVID-19) is still causing a wide range of infections and deaths due to the high variability of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Therefore, it is necessary to establish a reliable and convenient pseudovirus-based neutralization assay to develop drug targeted variants of SARS-CoV-2. Based on the HIV-1 backbone, we generated a high titer luciferase (Luc)-expressing pseudovirus packaging system. Three dominant S mutant substitution pseudovirus were also established and identified compared to wide type in hACE2-overexpressing HEK-293T cells (293T-ACE2 cells). Compared to serine protease inhibitor camostat mesylate, the cysteine protease inhibitor E-64d could significantly block all SARS-CoV-2 mutant S pseudovirus infection in 293T-ACE2 cells. Furthermore, the neutralization ability of two antibodies targeted receptor-binding domain (RBD) of SARS-CoV-2 spike protein (S) was evaluated, which showed different inhibition dose–effect curves among four types of S pseudovirus. Overall, we developed a pseudovirus-based neutralization assay for SARS-CoV-2, which would be readily adapted to SARS-CoV-2 variants for evaluating antibodies.

Regula Naef