The ability to detect and size individual nanoparticles with high resolution is crucial to understanding the behaviour of single particles and effectively using their strong size-dependent properties to develop innovative products. We report realtime, in situ detection and sizing of single nanoparticles, down to 30 nm in radius, using mode splitting in a monolithic ultrahigh-quality-factor (Q) whispering-gallery-mode microresonator. Particle binding splits a whispering-gallery mode into two spectrally shifted resonance modes, forming a self-referenced detection scheme. This technique provides superior noise suppression and enables the extraction of accurate particle size information with a single-shot measurement in a microscale device. Our method requires neither labelling of the particles nor a priori information on their presence in the medium, providing an effective platform to study nanoparticles at single-particle resolution. With the rapid progress in nanotechnology, nanoparticles of different materials and sizes have been synthesized and engineered as key components in various applications ranging from solar cell
The CMS trigger system must reduce an input data rate from the LHC bunch-crossing frequency of 40 MHz to a rate which will be written to permanent storage. A detailed study has recently been made of the performance of this system. This paper presents key elements of the results obtained and gives details of a draft “trigger table” for the Level-1 Trigger and the High-Level Trigger selection at a “start-up” luminosity of 2× 1033 cm – 2s – 1. High efficiencies for most physics objects are attainable with a selection that remains inclusive and avoids detailed topological or other requirements on the event.
Annette Michalski, Eugen Damoc, J. Hauschild
et al.
Mass spectrometry-based proteomics has greatly benefitted from enormous advances in high resolution instrumentation in recent years. In particular, the combination of a linear ion trap with the Orbitrap analyzer has proven to be a popular instrument configuration. Complementing this hybrid trap-trap instrument, as well as the standalone Orbitrap analyzer termed Exactive, we here present coupling of a quadrupole mass filter to an Orbitrap analyzer. This “Q Exactive” instrument features high ion currents because of an S-lens, and fast high-energy collision-induced dissociation peptide fragmentation because of parallel filling and detection modes. The image current from the detector is processed by an “enhanced Fourier Transformation” algorithm, doubling mass spectrometric resolution. Together with almost instantaneous isolation and fragmentation, the instrument achieves overall cycle times of 1 s for a top10 higher energy collisional dissociation method. More than 2500 proteins can be identified in standard 90-min gradients of tryptic digests of mammalian cell lysate— a significant improvement over previous Orbitrap mass spectrometers. Furthermore, the quadrupole Orbitrap analyzer combination enables multiplexed operation at the MS and tandem MS levels. This is demonstrated in a multiplexed single ion monitoring mode, in which the quadrupole rapidly switches among different narrow mass ranges that are analyzed in a single composite MS spectrum. Similarly, the quadrupole allows fragmentation of different precursor masses in rapid succession, followed by joint analysis of the higher energy collisional dissociation fragment ions in the Orbitrap analyzer. High performance in a robust benchtop format together with the ability to perform complex multiplexed scan modes make the Q Exactive an exciting new instrument for the proteomics and general analytical communities.
Abstract Task scheduling, which plays a vital role in cloud computing, is a critical factor that determines the performance of cloud computing. From the booming economy of information processing to the increasing need of quality of service (QoS) in the business of networking, the dynamic task-scheduling problem has attracted worldwide attention. Due to its complexity, task scheduling has been defined and classified as an NP-hard problem. Additionally, most dynamic online task scheduling often manages tasks in a complex environment, which makes it even more challenging to balance and satisfy the benefits of each aspect of cloud computing. In this paper, we propose a novel artificial intelligence algorithm, called deep Q-learning task scheduling (DQTS), that combines the advantages of the Q-learning algorithm and a deep neural network. This new approach is aimed at solving the problem of handling directed acyclic graph (DAG) tasks in a cloud computing environment. The essential idea of our approach uses the popular deep Q-learning (DQL) method in task scheduling, where fundamental model learning is primarily inspired by DQL. Based on developments in WorkflowSim, experiments are conducted that comparatively consider the variance of makespan and load balance in task scheduling. Both simulation and real-life experiments are conducted to verify the efficiency of optimization and learning abilities in DQTS. The result shows that when compared with several standard algorithms precoded in WorkflowSim, DQTS has advantages regarding learning ability, containment, and scalability. In this paper, we have successfully developed a new method for task scheduling in cloud computing.
The objective of this work was to develop a highly active hydrotreating catalyst for processing heavy gas oil to provide qualified feedstock for hydroisomerization or a hydrocracking unit. The NiMo/γ-Al2O3 catalysts doped with phosphate were prepared by introducing two kinds of additives, and the influencing factors for highly active hydrodenitrogenation (HDN) were revealed. TEM analysis results showed that the catalyst with a small MoS2 stack length tended to have high activity due to more active sites being exposed. Laser Raman spectroscopy demonstrated that the catalysts contained PMo12O403− metal active phases. For industrial heavy VGO feedstock, the nitrogen content can be reduced to 2 ppm with a hydrotreating process. The VI of the hydrotreated product can be improved from 132 to 145 after hydrotreatment, which is necessary to produce group III base oil as the most valuable base oil type. This work provides an insight into the high activity of hydrotreating catalysts for industrial lubricant hydroprocessing.
The q‐rung orthopair fuzzy set (q‐ROFS), originally developed by Yager, is more capable than that of Pythagorean fuzzy set to deal uncertainty in real life. The main goal of this paper is to investigate the relationship between the distance measure, the similarity measure, the entropy, and the inclusion measure for q‐ROFSs. The primary purpose of the study is to develop the systematic transformation of information measures (distance measure, similarity measure, entropy, and inclusion measure) for q‐ROFSs. For obtaining this goal, some new formulae for information measures of q‐ROFSs are presented. To show the validity of the explored similarity measure, we apply it to pattern recognition, clustering analysis, and medical diagnosis. Some illustrative examples are given to support the findings, and also demonstrate their practicality and availability of similarity measure between q‐ROFSs.
Background Q-methodology is an approach to studying complex issues of human ‘subjectivity’. Although this approach was developed in the early twentieth century, the value of Q-methodology in healthcare was not recognised until relatively recently. The aim of this review was to scope the empirical healthcare literature to examine the extent to which Q-methodology has been utilised in healthcare over time, including how it has been used and for what purposes. Methods A search of three electronic databases (Scopus, EBSCO-CINAHL Complete, Medline) was conducted. No date restriction was applied. A title and abstract review, followed by a full-text review, was conducted by a team of five reviewers. Included articles were English-language, peer-reviewed journal articles that used Q-methodology (both Q-sorting and inverted factor analysis) in healthcare settings. The following data items were extracted into a purpose-designed Excel spreadsheet: study details (e.g., setting, country, year), reasons for using Q-methodology, healthcare topic area, participants (type and number), materials (e.g., ranking anchors and Q-set), methods (e.g., development of the Q-set, analysis), study results, and study implications. Data synthesis was descriptive in nature and involved frequency counting, open coding and the organisation by data items. Results Of the 2,302 articles identified by the search, 289 studies were included in this review. We found evidence of increased use of Q-methodology in healthcare, particularly over the last 5 years. However, this research remains diffuse, spread across a large number of journals and topic areas. In a number of studies, we identified limitations in the reporting of methods, such as insufficient information on how authors derived their Q-set, what types of analyses they performed, and the amount of variance explained. Conclusions Although Q-methodology is increasingly being adopted in healthcare research, it still appears to be relatively novel. This review highlight commonalities in how the method has been used, areas of application, and the potential value of the approach. To facilitate reporting of Q-methodological studies, we present a checklist of details that should be included for publication.