Bookmark Saya

Semantic Scholar Open Access 2018 351 sitasi

Fresh properties of a novel 3D printing concrete ink

Yu Zhang Yunsheng Zhang Guojian Liu Yonggan Yang Meng Wu +1 lainnya
Lihat Sumber DOI

Abstrak

Abstract 3D printing technique is an opportunity for the development of architecture industry altered by the emergence of 3D printing concrete ink that shows unconventional characteristics mainly originated from its geometric design. In this paper, a novel 3D printing concrete ink that has good fluidity during movement and satisfying standing behavior at static state due to the structural rebuilding of cement paste advanced by the addition of nano clay (NC) and silica fume (SF) was specially designed to be extruded through a nozzle to print layer-over-layer components for an innovative additive manufacturing process. The buildability, rheological properties (viscosity, yield stress and thixotropy), workability, green strength, open time and hydration heat of the fresh 3D printing concrete were systematically investigated. Results indicated that the buildability of this concrete with a small quantity of NC or SF were increased by 150% and 117%, respectively, and remarkably enhances the thixotropy and green strength. The double-doped NC and SF optimize the buildability.

Topik & Kata Kunci

Materials Science

Penulis (6)

Y

Yu Zhang

Y

Yunsheng Zhang

G

Guojian Liu

Y

Yonggan Yang

M

Meng Wu

B

B. Pang

Format Sitasi

APA MLA BibTeX
Zhang, Y., Zhang, Y., Liu, G., Yang, Y., Wu, M., Pang, B. (2018). Fresh properties of a novel 3D printing concrete ink. https://doi.org/10.1016/J.CONBUILDMAT.2018.04.115

Akses Cepat

PDF tidak tersedia langsung

Cek di sumber asli →
Lihat di Sumber doi.org/10.1016/J.CONBUILDMAT.2018.04.115
Informasi Jurnal
Tahun Terbit
2018
Bahasa
en
Total Sitasi
351×
Sumber Database
Semantic Scholar
DOI
10.1016/J.CONBUILDMAT.2018.04.115
Akses
Open Access ✓