Experimental Investigation of Thermal Strengthening in Sichuan Marble

It is well documented that temperatures higher than 400 ℃ can significantly lower rock strength due to thermally induced decomposition and microcracks. However, rock strength increase under temperatures 25–400 ℃ has also been reported. It remains elusive whether thermal strengthening does exist or it is just an illusion caused by rock heterogeneity. To uncover such a mystery, we carried out triaxial compression tests on Sichuan marble under 25–200 ℃. Rock heterogeneity was at a low level and data dispersion was limited in our experiment. We managed to observe a clear trend of strength increase with temperature, justifying the existence of thermal strengthening in Sichuan marble. To unveil the mechanism of thermal strengthening, five factors, as predominant and comprehensive as we could concern, were investigated. After careful examination and analysis, thermal expansion was inferred to be the main reason leading to the thermal strengthening in Sichuan marble. The mechanism may lie in tighter compaction between mineral grains due to thermal expansion. Since thermal expansion is a physical process that can occur in all crystalline rocks upon heating, thermal strengthening holds a high potential to be a general property of crystalline rocks in the moderate temperature range. To our best knowledge, this study is the first to explicitly confirm the existence of thermal strengthening and comprehensively investigate the underlying mechanisms. The findings provide a new understanding of the thermal effect on rock strength, which may aid rock engineering design under a thermo-mechanical coupling working condition. Triaxial compression tests were performed on Sichuan marble specimens in the temperature range 25–200 ℃. Rock heterogeneity was at a low level and thermal strengthening in Sichuan marble was confirmed. Thermal expansion is inferred to be the leading factor of thermal strengthening in Sichuan marble after a comprehensive investigation. Triaxial compression tests were performed on Sichuan marble specimens in the temperature range 25–200 ℃. Rock heterogeneity was at a low level and thermal strengthening in Sichuan marble was confirmed. Thermal expansion is inferred to be the leading factor of thermal strengthening in Sichuan marble after a comprehensive investigation.