Development of a special connection fracture model for reservoir simulation of fractured reservoirs

Abstract The significant world oil and gas reserves related to naturally fractured carbonate reservoirs adds new frontiers to the development of upscaling and numerical simulation procedures for reducing simulation time. This work aims to accurately represent fractured reservoirs in reservoir simulators within a shorter simulation time when compared to dual porosity models, based on special connections between matrix and fracture mediums, both modeled in different grid domains of a single porosity flow model. For the definition of special connection fracture model (SCFM), four stages are necessary: (a) construction of a single porosity model with two symmetric structural grids, (b) geomodelling of fracture and matrix properties for the corresponding grid domain, (c) application of special connections through the conventional reservoir simulator to represent the fluid transfer between matrix and fracture medium, (d) calculation of the fracture-matrix fluid-transfer. For a proper validation, we apply our methodology in a fractured reservoir type II (tight matrix with flow controlled by fractures) and consider a probabilistic framework regarding geological and dynamic uncertainties. The probabilistic approach of SCFM under several static uncertainties revealed a good dynamic matching with DP. Under three rock-wettability scenarios (water-wet, oil-wet and intermediate-wet) the dynamic matching with DP is preserved. Furthermore, SCFM did not present convergence issues, considering all probabilistic realizations. The results revealed that the new method can be applied to commercial flow simulators in fractured reservoirs and it presents itself as a solution to reduce simulation time without disregarding the upscaling and dynamic representation of dual porosity flow models.