DOAJ Open Access 2013

DESIGN AND FABRICATION OF THE BEAM POSITION MONITOR FOR THE PEFP LINAC

HYEOK-JUNG KWON HAN-SUNG KIM KYUNG-TAE SEOL JIN-YEONG RYU JI-HO JANG +1 lainnya

Abstrak

The beam position monitor (BPM) is an essential component for the PEFP 100-MeV linac's commissioning. A prototype stripline-type linac BPM was designed for this purpose. The electrode aperture is 20 mm in diameter, and the electrode is 25 mm long, so it can be installed between Drift Tube Linac (DTL)101 and DTL102, which is the shortest distance. One end of the electrode is connected to the Sub Miniature Type A (SMA) feed through for signal measurement, and the other end is terminated as a short. The signal amplitude of the fundamental component was calculated and compared with that of the second harmonic component. The designed BPM was fabricated and a low-power RF test was conducted. In this paper, the design, fabrication and low power test of the BPM for the PEFP linac are presented.

Topik & Kata Kunci

Nuclear engineering. Atomic power

Penulis (6)

HYEOK-JUNG KWON

HAN-SUNG KIM

KYUNG-TAE SEOL

JIN-YEONG RYU

JI-HO JANG

YONG-SUB CHO

Format Sitasi

APA MLA BibTeX

KWON, H., KIM, H., SEOL, K., RYU, J., JANG, J., CHO, Y. (2013). DESIGN AND FABRICATION OF THE BEAM POSITION MONITOR FOR THE PEFP LINAC. https://doi.org/10.5516/NET.08.2012.059

Akses Cepat

PDF tidak tersedia langsung

Cek di sumber asli →

Lihat di Sumber doi.org/10.5516/NET.08.2012.059

Informasi Jurnal

Tahun Terbit: 2013
Sumber Database: DOAJ
DOI: 10.5516/NET.08.2012.059
Akses: Open Access ✓