The Impact of High-Concentration Salt Solution on Morphological Changes in a Geosynthetic Clay Liner

Microscopic examination was used to begin investigating the changes in geosynthetic clay liner (GCL) specimens that had been hydrated with two separate solutions: pure water and a 50 percent concentration NaCl solution. After already being hydrated with NaCl aqueous solution, the GCL samples were examined under an electron microscope. Even though the treated GCL samples’ surfaces mirrored those of the untreated GCL, a crystal deposit was found there. It was found that the bentonite particles in the GCL sample appeared more solid after being hydrated with distilled water as opposed to the NaCl solution using a scanning electron microscope (SEM). It seems that wetting the salt solution decreases the bentonite particles’ tendency to swell. Additionally, it was demonstrated by the energy-dispersive X-ray spectrometer (EDS) data that distilled water hydration had no impact on the distribution of the elements identified in the GCL samples. On the other hand, the presence of bound chlorine demonstrated that the bentonite particles had absorbed the NaCl solution. The hydrated GCL sample’s hydraulic conductivity showed some variation as well.