Small-Rib-Height Perfobond Strip Connectors (SRHPBLs) in Steel–UHPC Composite Beams: Static Behavior Under Combined Tension–Shear Loads

Steel–ultra-high-performance concrete (UHPC) composite beams with small-rib-height perfobond strip connectors (SRHPBLs) exhibited advantages of light weight and high bearing capacity, demonstrating the potential for applications of UHPC in bridge engineering. During service stages, the composite beams were usually under combined tension–shear loads, rather than pure shear loads. Nevertheless, there were research gaps in the static behavior of SRHPBLs embedded in UHPC under combined tension–shear loads, which limited their applications in practice. To address this issue, systematic experimental and theoretical analyses were conducted in the present study, considering the test variables of tension–shear ratio, row number, and strip number. It was demonstrated that the tension–shear ratio had less effect on ultimate shear strength, initial shear stiffness, and ultimate slip of SRHPBLs. When the tension–shear ratio was increased from 0 to 0.42, the shear capacity, initial shear stiffness, and slip at peak load of SRHPBLs decreased by 24.31%,19.02%, and 22.00%, respectively. However, increasing the row number and strip number significantly improved the shear performance of SRHPBLs. Compared to the single-row specimens, the shear capacity and initial shear stiffness of the three-row specimens increased by an average of 92.82% and 48.77%, respectively. The shear capacity and initial shear stiffness of the twin-strip specimens increased by an average of 103.84% and 87.80%, respectively, compared to the single-strip specimens. Finally, more accurate models were proposed to predict the shear–tension relationship and ultimate shear capacity of SRHPBLs embedded in UHPC under combined tension–shear loads.