Methodology of Optimum Selection of Material and Semi-Folded Products for Rotors of Open-End Spinning Machine

The article presents the methodology of optimal selection of material and the form of semi-product for the rotors of the spindle-less spinning machine. The multicriteria approach was utilized taking into account versatile criteria. The applied procedure consists of two stages: the optimum method in the Pareto sense and the method of distance function. Based on the analysis of the spinning head work, rotor and availability function, six different materials and three forms of semifinished products (extruded bar, forged element, and cast element) were considered. In consequence, the admissible set consisting of nine elements was obtained. For the evaluation of technological quality of the rotor, the following criteria were proposed: index of functionality of the material σf/ρ, maximum height of the surface peaks, Sp, and maximal hardness on surface of oxide layer μHV0,1. Finally, taking into account the economical criterion (unit cost), the Pareto-optimal set of solutions was determined based on four criteria. Due to the fact that this set contained five variants, the distance function was utilized for choosing the best final variant. The optimal material and the semi-product (because of the assumed criteria) chosen were as follows: alloy AlSi1MgMn and the forged element—because in this case the value of distance function was minimal.