DOAJ Open Access 2019

Effect of Al2O3 and Fly Ash Addition on Mechanical, Wear and Corrosion Properties of Al-Mg-Si Base Alloy

Waleed T. Rashid

Abstrak

The aim of this study is to studding the effect of addition of alumina and fly ash with the particles size 106µm and different weight rations (2:2, 2:4, 4:2) to aluminium-magnesium-silicon alloy on microstructure, mechanical properties, corrosion resistance, and wear. The vortex technique was used to prepare the composite material. The microscopic structure was also examined using optical microscopy and mechanical tests (hardness, tensile strength, yield strength and elongation) and wear test. The results showed that the composite material the containing (2% fly ash and 4% alumina) had the highest tensile strength (119 Mpa), yield strength (76 Mpa) and hardness (89 kg \ mm2), while it has the lowest ductility (5.3%). It was also found to have the lowest wear rate (1.8* 10-6gm \ cm) and the highest corrosion resistance.

Topik & Kata Kunci

Engineering machinery, tools, and implements Mechanics of engineering. Applied mechanics Electrical engineering. Electronics. Nuclear engineering Chemical engineering Environmental engineering

Penulis (1)

Waleed T. Rashid

Format Sitasi

APA MLA BibTeX

Rashid, W.T. (2019). Effect of Al2O3 and Fly Ash Addition on Mechanical, Wear and Corrosion Properties of Al-Mg-Si Base Alloy. https://doi.org/10.24237/djes.2019.12208

Akses Cepat

PDF tidak tersedia langsung

Cek di sumber asli →

Lihat di Sumber doi.org/10.24237/djes.2019.12208

Informasi Jurnal

Tahun Terbit: 2019
Sumber Database: DOAJ
DOI: 10.24237/djes.2019.12208
Akses: Open Access ✓