Effect of Solution Annealing on Austenite Morphology and Pitting Corrosion of Super Duplex Stainless Steel UNS S 32750
Abstrak
The pitting corrosion resistance of super duplex stainless steel (SDSS) varies depending on heat-treatment conditions. Therefore, in this study, the volume fraction and morphology of austenite on SDSS were controlled in 6 samples, and the effect on the pitting corrosion after solution annealing was analyzed to of the critical pitting temperature (CPT). The pitting-resistance equivalent (PRE = wt % Cr + 3.3 wt % Mo + 16 wt % N) was became equal by solution annealing, but the CPT exhibited varying values. Despite heat treatment of the solution annealing, the CPT increased by 15.9 °C from 67.5 °C to 83.4 °C. The solution annealing removed the segregation of the chemical composition and assisted in improving the PRE; however, it not removed in a non-uniform morphology of austenite. Therefore, the corrosion resistance of SDSS can be optimized by appropriately controlling the morphology of austenite during the manufacturing process.
Topik & Kata Kunci
Penulis (3)
Changwon Sung
Byung-Hyun Shin
Wonsub Chung
Akses Cepat
- Tahun Terbit
- 2021
- Sumber Database
- DOAJ
- DOI
- 10.20964/2021.08.08
- Akses
- Open Access ✓