First SOLEDGE3X-EIRENE simulations of the ITER Neon seeded burning plasma boundary up to the first wall

Boundary plasma simulations are essential to estimate expected divertor and first wall (FW) heat and particle loads on ITER during burning plasma operation. A key missing feature of existing SOLPS simulations (Pitts et al., 2019) is the absence of a plasma solution out to the main chamber walls, essential to self-consistently estimate the gross sputtering of wall material. Here, SOLEDGE3X is applied for the first time to obtain up-to-the wall burning plasma solutions of the ITER boundary plasma at the nominal PSOL = 100 MW of the main SOLPS database simulations, including He ash, Ne seeding but without fluid drifts. Compared with the most recent SOLPS-ITER simulations, our simulations show differences in the exact impurity distribution, but the key results for divertor and wall heat flux remain consistent. In the context of the ITER re-baselining exercise (Pitts, 2024), in which the Be FW armour is proposed to be exchanged for tungsten (W), estimates of W wall sources are key to the assessment of likely core contamination and hence impact on fusion gain. We compare the W gross erosion rates due to the different species excluding W self-sputtering. For the cases simulated spanning 0.27%–0.47% separatrix-averaged Ne concentration and 7.5×1022s−1−1.95×1023s−1 D fuelling, Ne8+ remains the largest contributor to the sputtering flux with the largest source being the outer divertor and baffle. The species-wise contribution to W sputtering changes with fuelling with sputtering due to lower Ne charge states being significant at low D fuelling. In general, the gross W sputtering source is found to decrease with increase in D fuelling and increase with increased Ne seeding.