Dynamic simulation of a 4th generation district heating network with the presence of prosumers

District Heating Network is identified as a promising technology for decarbonizing urban areas. Thanks to the surplus of heat available from distributed renewable energy plants, a typical heat consumer of the network could become an energy producer during the day (typically referred to as a “prosumer”). Most of the models for thermal grids developed during past years usually assumed a centralized production of the consumed heat. The increasing presence of prosumers will require accurate dynamic modelling to monitor the changes induced in the thermohydraulic parameters of the network. To fill this knowledge gap, this paper aims at developing a model of a thermal grid with prosumers in the TRNSYS environment. The model allows for the dynamic monitoring of the main thermohydraulic parameters of the network. To show these capabilities, a ring-shaped network serving a cluster of 10 residential users located in Palermo (Italy) was assumed as the case study. Different scenarios are investigated based on the presence of solar collectors, prosumers along the network, and cooling by an absorption chiller. The achievable energy and emissions savings are calculated. The results of the study show that even only decreasing the operating temperature can significantly reduce heat losses via the network pipes. In particular, a temperature drop from 100 °C to 80 °C can reduce heat losses by 27.1%. Furthermore, the heat losses can be decreased by up to 52.8% when the network temperature is lowered from 100 °C to 60 °C. Additionally, the presence of prosumers and the solar field could lead to a 31.3% reduction in the energy produced by the centralized plant and a 17.6% reduction in energy consumed for pumping.