Improving the corrosion resistance of FeCrAl alloy in high temperature hydrogenated water through gaseous pre-oxidation
Abstrak
FeCrAl alloy, a promising candidate for accident tolerance fuel (ATF) cladding, has relatively low resistance to general corrosion in high temperature water. To improve the corrosion resistance, a continuous Al2O3 layer was formed on the surface of FeCrAl alloy through gaseous pre-oxidation. It was found that such treatment can significantly improve its corrosion resistance in high temperature hydrogenated water. The thickness of inner oxide layer after exposure to 320 °C hydrogenated water for 950 h was reduced by ∼40%. In addition, the size and density of outer oxide particles were also decreased. However, the Al2O3 film pre-formed on FeCrAl alloy had poor stability in high temperature water and its long-term effect needs to be further evaluated.
Topik & Kata Kunci
Penulis (3)
Jiayu Xie
Xin Ma
Wenjun Kuang
Akses Cepat
PDF tidak tersedia langsung
Cek di sumber asli →- Tahun Terbit
- 2024
- Sumber Database
- DOAJ
- DOI
- 10.1016/j.corcom.2024.03.001
- Akses
- Open Access ✓