The kinematic design of mold clamping mechanism with minimal maximum acceleration
Abstrak
Typically, the motion of the output link of the mode clamping mechanism has reciprocating linear motion, but the motion of the input link can be reciprocating rocking motion or reciprocating linear motion. In addition, the mold clamping mechanism must have a dead-position configuration for the mold at the closed position. This article focuses on the kinematic design of a mold clamping mechanism having an input link with reciprocating linear motion and having dead-position configuration at closed positions. First, four design concepts of mold clamping mechanisms are proposed based on the mechanism creative design methodology. Then, one of the design concepts is chosen as the design example to illustrate the kinematic design of the mode clamping mechanism with minimal maximum acceleration. According to the design requirements, the best design of the mode clamping mechanism of this article is better than the existing patent by reducing 43.5% acceleration and 18.6% driving force.
Penulis (3)
Long-Chang Hsieh
Tzu-Hsia Chen
Po-Cheng Lai
Akses Cepat
- Tahun Terbit
- 2014
- Bahasa
- en
- Total Sitasi
- 9×
- Sumber Database
- CrossRef
- DOI
- 10.1177/1687814020926280
- Akses
- Open Access ✓